Cross-Border Neue XTE Multifunktionsbrille mit Licht, Typ-C-Ladeanschluss, Warnfunktion, kompakter tragbarer Sensor-Scheinwerfer

Model SY5865 Light bulb XTE+40*COB Product size/net weight 16*8*6CM 98G Box size/gross weight 19*10*7CM 189G Material ABS Switch Dual push-button switch (position switch + sensor switch) Battery Built-in 800mAh polymer battery Charging method Type-C USB charging Charging time/battery life Charging time: 5-6 hours Battery life: 3-4 hours Gear position Five modes: 40*COB strong light - 40*COB weak light - XTE strong light - XTE weak light - long press for COB+XTE fast flashing Except for the flash mode, any mode can be detected Zoom mode None Waterproof rating IPX4 Lumen/Range 350-500lm 50-100M Features Multifunctional glasses light, switchable between near and far light, sensor-controlled Indicator light When charging, the LED light stays red, and when fully charged, it turns green Color Yellow Blue The package contains Glasses light + USB cable + zipper bag 60pcs 43.5*41.5*64.5C 12.5KG 1. Instructions for use: 1. Check the battery: Ensure the battery has power and is installed in the correct direction in the flashlight; 2. When using a flashlight, choose the battery according to the flashlight's voltage and battery requirements; do not use the wrong battery to prevent damage to the circuit board. Do not use batteries of different models and voltages simultaneously 3. During use, when the brightness of the flashlight changes significantly, turn off the flashlight to prevent over-discharging of the battery and recharge it promptly. Pay attention to the battery's waterproof, moisture-proof, and drop-proof features. When charging, according to the charger's charging speed, remove the battery in time after the indicator light changes, and do not overcharge 4. Batteries that are not used for a long time should be fully charged and kept in that state. It is recommended to recharge and discharge them again approximately every three months to avoid chemical corrosion 5. Keep the inner wall of the lamp cup clean; absolutely do not wipe it with your hands or hard objects. To remove fingerprints from the lens, use a cotton swab dipped in lens cleaner and gently wipe it 6. Do not expose the flashlight to sunlight, water, chemicals, or corrosive gases for extended periods to avoid damage to the flashlight 7. Non-professionals should not disassemble the flashlight to avoid damaging the circuit board. 2. Precautions: 1. Do not shine light directly into the eyes to avoid causing damage to them 2. Please do not use it with excessive voltage; the voltage should not exceed 4.2V. Do not place the battery upside down, otherwise the circuit board will be damaged 3. When charging, please pay attention to the positive and negative poles of the charger and avoid overcharging or over-discharging the battery to prevent damage to its lifespan (charging time is generally 5-8 hours) 4. When using the flashlight, check that all the screws are tightly tightened and not loose, otherwise it may result in the flashlight not lighting up or only lighting up dimly 5. The flashlight should be kept away from sunlight or high-temperature environments. After stopping use, please remove the battery, fully charge it, and store it in a cool, dry place 6. The company's flashlight has the ability to withstand water splashes in daily life and generally won't have any issues when exposed to rain. However, it does not have the capability to be submerged in water, so please do not use this flashlight for diving or leave it in a basin or bathtub for extended periods of time 7. To maintain the smooth rotation of the O-ring (sealing rubber ring) and threads, please perform maintenance on their surface 2-3 times a year Apply petroleum jelly, etc. to the surface. 3. Charging instructions: Insufficient power should be replenished promptly to avoid affecting the battery's lifespan, and the battery should also be charged during long-term storage