Soundcore by Anker Space One Kopfhörer Hi-Res Sound Hybrid Active Noise Cancelling Headsets ANC TWS-A3035

Authorized Anker Sound Core Reseller - Red Design 100% Local Stock · Ships from Malaysia · Fast Delivery 100% Authentic with Local Warranty​​​ 2X* stronger voice reduction *Compared with Soundcore Life Q30 headphones Reduces noise by up to 98%* with adaptive noise cancellation *Tested by soundcore under laboratory conditions Crisp, high-resolution sound via 40mm dynamic drivers Worry-free battery (40 hours with ANC on, 55 hours with ANC off) 8° rotating ear cups and soft integrated headband for all-day comfort 5 levels of adjustable transparency to tune your world How to Switch Ambient Sound Modes normal modes. How to Reset To reset the Space One back to factory settings, turn on the headphones and then press and hold the power button and volume up button for 5 seconds.The power indicator light will flash slowly three times in red, indicating that the headphones have been successfully reset to factory settings.Note: After restoring to factory settings, all function switches will be returned to their default settings.For example, after restoring to factory settings, the wear detection function will be restored to the default closed state.Please reset the function switches according to personal usage habits. How to Switch to BassUp Mode 1.The "Controls" section of the soundcore app allows you to set the double-tap NC button to activate the BassUp feature.After setting, you can experience the BassUp effect by double-tapping the NC button.2.You can also select the Bass Booster EQ in the Soundcore app to experience the BassUp effect. How to Enable the Wear Detection Function The automatic play/pause feature (Wearing Detection) is turned off by default.Please remove the dustproof sticker on the sensor detection hole inside the left earpad.Enable the "Wearing Detection" in the upper right corner of the soundcore app to activate the Wearing Detection feature. Wearing Calibration Related 1. If the wearing detection function is not sensitive enough, you can use the wearing calibration feature to improve the sensitivity of the wearing detection. 2. Calibration method: You can perform wearing calibration in the "Wearing Detection" section of the soundcore app's settings menu by following the prompts to restore detection sensitivity. To avoid calibration failure, please pay close attention to the placement/wearing guide provided in the souncore app.