Sweeping Robot 3-in-1 Charging Smart All-in-One Vacuum Sweeper
Product Name: Intelligent Sweeping Robot
Product Specification: 30x30x7cm
Operating Voltage: 3.7V/1800mah
Charging Time: about 3 hours (USB charging)
Duration: about 90 minutes
Product Weight: 1106g
Operating Noise: <55db
Steps of Use:
1. After receiving the product, please turn on the bottom Main switch.
2. Check whether the wheels on the bottom of the machine are installed properly.
3. Before using the product should be removed from the battery cover screws to install the battery correctly.
4. Install the brush.
5. Charging port of the product, charge it before you start using it.
6. The first tape on the bottom of the product, and then the mopping cloth can be attached.
7.You need to inject water from the water filling port before using the product.
8. can be used normally, press once to start the work, press twice, you can start the spray
Product Features:
1.Sweeping robot work when the spray can prevent dust flying all over the sky.
2. Extended sweeping brush without dead ends, large sweeping area, cleaner.
3. Bottom UV light cruise, kill invisible bacteria.
4. Suitable for all kinds of floor materials, intelligent recognition of the ground, deep extraction of the junction root dirt.
5. Enlarged sealed dust box, large storage capacity, very good filtering and interception of fine dust, blowing out clean air.
6. Large suction noise, low decibel rate.
Customer Service
4.0 von 5 basierend auf 4,274 bewertungen 
